1-channel electronic circuit breakers with marine approval protect 24 V circuits.

The 1-channel electronic circuit breakers provide reliable overload protection for electrical and electronic components such as control technology, measurement technology and sensors/actuators. Additionally, in the event of a short circuit, all seven available circuit breakers guarantee fast, reliable tripping. Thanks to a small installation width of just 6 mm, the circuit breakers are suitable for small electrical distribution boards on ships, where they require no maintenance at all.

The integrated digital input is used for resetting and switching, for example from the bridge, and the digital output reports the current status in real-time. In addition to notification of breaker trips due to overcurrent or short circuit, other messages can be set up, such as an early warning at 70%, 80% or 90% capacity. This increases the timeframe for a response and ensures even greater reliability.

The fact that they have the same profile allows direct commoning of the input and output voltage across additional 857 and 2857 Series devices.

Your benefits include:

  • Protection of load currents from 0.5 A to 8 A
  • Slim 6mm (0.236 inch) design saves space
  • Circuit breaker trips reliably within milliseconds
  • Device can be reset and switched on/off directly on it, or via a digital input signal from the bridge or control system
WAGO 1-Channel Electronic Circuit Breakers with Marine Approval